1/2" CTS (.090 Wall) ConStab x 5/8" OD Copper Flare Gas Transition
Con-Stab Fittings are for GAS applications
For use with Yellow MDPE or Black HDPE Gas Pipe
These constab fittings are not for geothermal (See GeoStab Fittings)
NOTE: Installation Requires the use of Special Continental ID Chamfer Tool. These tools are available for purchase in our ConStab Tools Section. Written instructions are included with every fitting.
Con-Stab ID Seal® fittings are stab-type mechanical fittings used to join polyethylene pipe and tubing. These fittings are used for natural gas distribution, LPG and Propane Gas distribution, and yard gas systems.
Con-Stab fittings are designed to join pipe meeting ASTM D2513
Category 1 mechanical joint
Patented design seals on the protected interior surface of the pipe
Pressure rating 125 psig
Size Range — ½” to 2”
Configurations (Couplings, Tees, Elbows, End Caps, Reducers)
Can be used for the following PE materials; 2306, 2406, 2708, 3306, 3408, 3708, 4710.
Con-Stab fittings are available to transition from PE to copper, PE to steel and PE to PVC.