2" IPS Hdpe Poly Ball Valve (Black PE4710) SDR11 Full Port
Valves meet ASTM D 2513 requirements, ISO 9001, and are manufactured with
materials that are approved for water contact as defined by NSF
MATERIAL DETAILS
Number Component Material Features
1 Body Polyethylene PE3408/PE100, PE 2406
2 End Polyethylene PE3408/PE100, or PE 2406
3 Ball Acetal / Polypropylene* Excellent Strength & Thermal Resistance
4 Retainer Polypropylene
Positive seal under any condition. Retains seat
under high differential pressure
5 Ball Seat Nitrile (HNBR) Reliable sealing from –20 F to 140 F
6 Stem Acetal Excellent durability & strength
7 Stem Seal Nitrile (HNBR) Redundant sealing with dual O-rings
8 Weather Seal Nitrile (HNBR) Protects from ground water and dirt
9 Operating Nut Polypropylene 2 inch (50mm) square or hexagon
10 Purge Connector Polyethylene Integral easy purge connection
Note: Valve utilizes a specially compounded Nitrile (HNBR) seal, unique in the industry. HNBR = Hydrogenated Nitrile rubber,
known for its excellent high temperature performance, tensile strength, as well as high resistance to fuels, oils, solvents, and ozone.
*2” IPS Reduced Port valves and smaller—Acetal 2” IPS Full Port valves and larger—Polypropylene
Spec Sheet