8" IPS Electrofusion Tee
4.0mm Pin with Universal Barcode
NOTE: Side outlet is SDR11 butt fusion. The outlet can be fused using an electrofusion coupling, socket fusion coupling, or standard butt fusion.
Gas, Water, Sewer, Geothermal and other Industrial Applications, PE 4710 Black, Bar Code Capable, 4mm Pins. Compatible with Yellow MDPE PE 2406, Black PE 3408, PE4710, PE100, and PE 3608 Pipe and Fittings without any special fusion procedures.
Fittings Rated Pressure: 125psi for Natural Gas Distribution, 200psi for Water and Industrial Applications
Manufactured in accordance with ASTM F-1055 for use with pipe conforming to ASTM D2513/3035, F-714
ASTM D2513, ASTM F1055, ASTM F2897, ISO 8085, ISO 14236
Made with PE100 / PE4710 Resin.
Supplied with a 24 Digit ISO Compliant Universal Barcode Label.
Meets AWWA C906
Resin Carries a NSF Standard 61 for use with potable water.
Additional submittal data and technical drawings are available upon request.
Integrity Fusion continues to be the market leader in electrofusion fittings, by offering innovative solutions to all of your fusible needs. Our IntegriFuse brand EF Equal Tees are molded in sizes up through 8” IPS and fully pressure rated to SDR 11. The EF Tees are manufactured with electrofusion outlets on the mainline, and butt fusion on the outlet, allowing the installer several options when connecting the lateral line. Electrofusion Tees offer a convenient alternative to traditional butt fusion when dealing with tight spaces, repairs, vertical applications, or any project when diffcult to utilize butt fusion equipment. IntegriFuse EF Fittings are manufactured from the highest quality black high density bimodal polyethylene copolymer resin designed for use in, but not limited to, potable water, natural gas, industrial, landfill, oil & gas, and mining applications. All IntegriFuse fittings meet ASTM –D2513 & ASTM D3261(where applicable)
OTHER SPECIAL ORDER SIZES ARE AVAILABLE UPON REQUEST
Email us at: firstname.lastname@example.org
All prices are in USD